The VIVID series of LED posters by BLASTKING is an alternative to traditional roll-up banners.
It can be widely used in stores, shopping malls, exhibitions, trade shows, events, restaurants, hotels, bars, and schools.
V2P-12 LINK Model
MODEL | V2P-12 / V2P-12 LINK |
---|---|
Pixel Pitch | 2.5 mm |
Power Consumption | 990 / 390 W |
Contrast Ratio | 8000:1 |
Viewing Angle | H: 160° V: 160° |
Brightness | >1000 nits/ m2 |
LED´s | Nationstar |
Protection | IP40 |
Permitted Temperatures in Operation | -10°C + 45° / 10 - 90% Humidity |
Refresh Rate | >3840 Hz |
Power | 110-220V AC / 50-60 Hz |
Lighting Lifespan | +100,000 hours |
Height | 72.58” / 1843.6mm |
Width | 25.73”/ 653.6mm |
Depth | 1.97” / 50mm |
Weight | 104 lb / 47.2 kg |
Loading capacity up to 650,000 pixels with a maximum width of 1920 pixels and a maximum height of 1080 pixels
1x Gigabit Ethernet output
1x Stereo audio output
1x HDMI 1.3 input, accepting HDMI input and allowing content to auto fit to screen
1x USB 2.0, capable of playing solutions imported from a USB drive
1x USB Type B, capable of connecting to a PC
Connecting this port to a PC allows users to configure screens, publish solutions, etc. with
NovaLCT and ViPlex Express.
Powerful processing capacity
4 core 1.2 GHz processor
Hardware decoding of 1080P videos
1 GB of RAM
32 GB of internal storage
All-round control plans
Solution publishing and screen control via user terminal devices such as PC, mobile phones and tablets
Remote cluster solution publishing and screen control
Remote cluster screen status monitoring
Synchronous and asynchronous modes
When the internal video source is used, the TB2-4G (Optional 4G) works in asynchronous mode.
When the HDMI video source is used, the TB2-4G (Optional 4G) works in synchronous mode.
Built-in Wi-Fi AP
User terminal devices can connect to the built-in Wi-Fi hotspot of the TB2-4G (Optional 4G).
The default SSID is “AP+Last 8 digits of SN” and the default password is “12345678”.
Support for 4G modules
The TB2-4G (Optional 4G) ships without a 4G module. Users have to purchase 4G modules separately if needed.
Wired network is prior to 4G network. When both of the networks are available, the TB2-4G (Optional 4G) will choose signals automatically according to the priority.
Loading capacity up to 1,300,000 pixels with a maximum width of 3840 pixels and a maximum height of 4080 pixels
2x Gigabit Ethernet output
1x HDMI 1.3 output, allowing for HDMI Loop
1x HDMI 1.3 input, accepting HDMI input and allowing content to auto fit to screen
2x USB 2.0, capable of playing solutions imported from a USB drive
On-board brightness sensor connector, allowing for automatic and scheduled smart rightness adjustment
Synchronous playback across multiple screens
Powerful processing capacity
4 core 1.6 GHz processor
Hardware decoding and playback of H.265 4K HD videos
Hardware decoding of 1080P videos
2 GB of RAM
32 GB of internal storage
All-round control plans
Solution publishing and screen control via user terminal devices such as PC, mobile phones and tablets
Remote cluster solution publishing and screen control
Remote cluster screen status monitoring
Synchronous and asynchronous modes
When the internal video source is used, the TB4 works in asynchronous mode.
When the HDMI video source is used, the TB4 works in synchronous mode.
Built-in Wi-Fi AP
User terminal devices can connect to the built-in Wi-Fi hotspot of the TB4.
The default SSID is “AP+Last 8 digits of SN” and the default password is “12345678”.
Support for 4G modules
The TB4 ships without a 4G module. Users have to purchase 4G modules separately if
needed.
Wired network is prior to 4G network. When both of the networks are available, the TB4
will choose signals automatically according to the priority.
Copyright 2022 VIVID LED SERIES | All Rights Reserved | No part of this website or any of its contents may be duplicated in whole, or in part, without written permission from Blastking.